Home > Products > Industrial weighing > DME series
DMEseries
Density Measurement Balance
LF series

Density measurement & simple weight measurement - Two in one

Measure the density
DME series is the balance specialized in density measurement. The value of the relative density and the volume can be easily measured. It is convenient for quality control in manufacturing line like rubber, plastic, etc...

Two use in one unit

DEM series can be available as standard precision balance when water tank is replaced with standard weighing pan. The weighing pan is included as standard.

Weight a sample in the air, and storing

Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.

The water temperature measuring and storing

Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by the refenence water temperature.

Weight a sample in the water, and storing

Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the balance the weight data.

The relative density and volume indication

The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.

Hydrometer Kit. (Option)

In case of the lighter sample than the water

Cover the sample with attached Underwater Sample Holder, and measure it.

Specifications

Models
DME-220E
DME-220HE
Capacity in density
220g
220g
Capacity in weight measurement
600g
600g
Readability (d)
0.01g
0.01g
Repeatability
0.01g
0.01g
Linearity
±0.01g
±0.01g
Pan size
140mm dia.
140mm dia.
Calibration
External
Internal & External

Common Specifications

Measuring system
Tuninng-fork frequency sensing
Tare
Full weighing range
Display
Back lit LCD

Options

RS-232C Output
Rechargeable battery(12 Hour Charge, 32 Hour Operable)
* Battery cannot be used with the output as same time.
Hydrometer Kit (For DME-220H only)
Home > Products > Industrial weighing > DME series